Impala Wheels 4pk 58mm Red Replace your worn out wheels or customise the look of your skates with the Impala Red Wheels. SPECS: 58mm x 32mm 82A Durometer Urethane Suited to indoor and outdoor recreational use NOTE: This is a pack of four (4) wheels, if you would like a full set for both skates you need to purchase two packs of wheels.

Replace your worn out wheels or customise the look of your skates with the Impala Pink Wheels. SPECS: 58mm x 32mm 82A Durometer Urethane Suited to indoor and outdoor recreational use NOTE: This is a pack of four (4) wheels, if you would like a full set for both skates you need to purchase two packs of wheels.

Impala Wheels 4pk 58mm Holographic Glitter Replace your worn out wheels or customise the look of your skates with the Impala Holographic Glitter Wheels. SPECS: 58mm x 32mm 82A Durometer Urethane Suited to indoor and outdoor recreational use NOTE: This is a pack of four (4) wheels, if you would like a full set for both skates you need to purchase two packs of wheels.

Impala Wheels 4pk 58mm Aqua Replace your worn out wheels or customise the look of your skates with the Impala Aqua Wheels. SPECS: 58mm x 32mm 82A Durometer Urethane Suited to indoor and outdoor recreational use NOTE: This is a pack of four (4) wheels, if you would like a full set for both skates you need to purchase two packs of wheels.

The REKD wrist guard provides 360° protection for your wrists and is ideal for a wide range of action sports including skateboarding, recreational skating and roller derby. With a Dual Splint heavy duty guard and a hard wearing 600D Polyester material, these have been engineered to last!   Sizing is measured around the wrist in CM; Extra Small: 10-12cm Small: 12-15cm Medium: 15-18cm Large: 18-20cm Extra Large: 20-23cm

The Envy Street Pegs come individually for greater flexibility on your setup. Run single side pegs, double side pegs, two front pegs or two back pegs. Mix it up to the way you ride with only what you need. Constructed with Aluminium on the base, and Chromoly Steel on the outer shell, these pegs are strong and perfect for sliding. Price is for one individual peg. Axles sold seperately.

Add a spooky touch to your setup with the Sacrifice Voodoo Grip Tape. SPECS:  Large sharp sand grain for extra grippy surface High quality glue for long lasting stick 530mm x 112mm

Upgrade your ride with some high quality grips from Envy. These grips are suitable for both Steel and Aluminium. They're extra long, super soft and comfortable with no flanges.

The Fasen Integrated Headset is made specifically for the Fasen scooter decks, although it will match up 100% with any other scooter deck with an integrated headset cup system. SPECS: 6061 Aluminium Laser etched logo 2x 41.8mm fully sealed bearings

Root Industries are always chasing the pursuit of perfection in every product they design and manufacture. Made using only the highest quality materials the Root Industries Grip Tape is super sticky and super grippy. The extremely fine, rough aggregate gives a comfortable feel under foot while giving superior grip. SPECS: 4.75" Wide x 20" Long

Root Industries are always chasing the pursuit of perfection in every product they design and manufacture. Made using only the highest quality materials the Root Industries Gripate is super sticky and super grippy. The extremely fine, rough aggregate gives a comfortable feel under foot while giving superior grip. SPECS: 4.75" Wide x 20" Long

The Spy 2 Bolt Collar Clamp might be small, but it has incredible grip force. The design incorporates a threaded steel insert which means you can tighten the clamp till your heart’s content without the fear of stripping it. The clamp body has material removed strategically to save weight, but keep the high clamp force. It also uses a 6ml Titanium bolt for add strength and reliability. The new Spy 2 Bolt Clamp has a unique design cutting more weight off the clamp where it is not needed and logo proudly CNC into the front of the clamp. SPECS: Material:...

Inspired by DC Comic's favourite sexy nature-loving villain. SPECS: 4.5" Wide x 21" Long Perforated High quality adhesive Poison Ivy 'Sexy Girl' artwork

Ride in style with the new grippy themed rider grip tape SACCIJAX.

The new Sacrifice Spy Nylon Brake is super lite and strong with a spring steel insert built inside the brake for extra strength. The top of the brake has little diamonds on it to give you extra grip, making the brake a lot safer to use than a standard steel brake. Using a super strong Nylon we have designed the brake with a decent concave so the brake fits perfectly around the wheel giving you great stopping ability when needed. The new Spy brake is fitted to all our 2019 Flyte V2 range and will also fit the OG Player...

Sacrifice Scooter Fork Cyborg IHC Neo Chrome This Cyborg IHC Fork by Sacrifice leads the way in fork technology! The fork is cold forged from aircraft grade aluminium, then precision machined. The new slim fork design manages to be super light at just 220g, while maintaining amazing strength. With an integrated crown race the integrated headset compression system stays incredibly dialled and fits any size head tube. Fork comes with easy-fit steel spacers. SPECS: Cold forged from aircraft grade aluminium then precision machined Integrated crown race keeps IHC incredibly dialled Fits any size head tube Includes easy fit steel spacers Weight:...

Sacrifice Cyborg IHC Fork Purple Anodised This Cyborg IHC Fork by Sacrifice leads the way in fork technology! The fork is cold forged from aircraft grade aluminium, then precision machined. The new slim fork design manages to be super light at just 220g, while maintaining amazing strength. With an integrated crown race the integrated headset compression system stays incredibly dialled and fits any size head tube. Fork comes with easy-fit steel spacers. SPECS: Cold forged from aircraft grade aluminium then precision machined Integrated crown race keeps IHC incredibly dialled Fits any size head tube Includes easy fit steel spacers Weight: 220g...

After 8 years with our famous S grip we have gone 1 step better with a new and improved Spy grip. The new Spy grips are super soft and we have used a unique shock absorbing silicon/rubber that is super comfortable and will fit your hands like a glove. The new Spy grip is 170mm long and we have added some great features to the grip making it even better so you get the best grip possible making your ride so much better. With every pair of Spy grips you also get 2 Sacrifice bar ends to ensure your safety...

Bronson Speed Co. G3 Bearings The Bronson Speed Co. G3 Skateboard Bearings are engineered to roll further and resist impacts better than any other bearing on the market. More than two years of testing and development were put into the G3, chances are you won't be disappointed.

Bone Super REDS are designed from the ground up to be the best bearing on the market at this great price. As fast as REDS, but quieter, smoother and longer lasting. Super REDS aren't just a REDS bearing with better super finishing (surface polishing), Super REDS are a superior quality bearing, using higher quality steel races, better grade balls, and a superior surface finish. The result is a bearing that is as fast as REDS, but quieter, smoother, and longer lasting. SPECS Higher quality steel races, better quality and grade balls, and a superior surface finish Single, non-contact, removable rubber...

Bones Race Reds Bearings 8pk Each Bones Race REDS Bearings is made with upgraded top quality bearing steel, ground to perfection and polished, best for racers who use precision trucks and properly tighten their axle nuts Precision ground 0.200 built in spacer to provide perfect 0.400 spacing between bearings. Precision ground extended race eliminates the need for speed washers, and provides better alignment of the bearings when the axle nut is tightened. Lubricated with Bones Speed Cream R.F. A groove on the inside of each bearings inner race eliminates weight and allows insertion and removal of the bearing using the Bones Bearing...

A brilliant way to keep your bearings in top condition. A detailed instruction sheet will be included with the kit to insure easy and proper use. Bearings and solvents not included. SPECS Made of fluorinated high density polyethylene 7 spacers for a good flush in less time Cleans up to 8 bearings at a time Cleans all skate bearings

Following the trend for lightweight hollow core technology, Fasen have matched their high-quality manufacturing with world class finishes to bring you a unique design of hollow core wheel. Using Fasen's tried and tested 86A PU and fitted with Abec 9 bearings, the Fasen Hollow Core range will definitely have riders in a hypnotising spin. SPECS: Toughened anodised finish 120mm diameter, 24mm wide PU Lightweight design 86a Urethane Includes Abec 9 bearings Only compatible with 120mm setups   Set of 2 wheels.

Ethic Sylphe Scooter Clamp Neo Chrome A minimalist design and a strong tightening grip thanks to the M8 screws. 7075 Aluminium alloy 2x M8 screws for 6mm allen wrench 34.8mm fits oversized bars Weight - 0.086 lbs standard

Envy OTR Oversized 2 Bolt Clamp Wood SPECS: Includes shim to fit oversize and standard bars Compatible with IHC or HIC compressions 2x 6mm screws Colour: Wood

The Envy Quad H-Clamp is another gem of a product from Envy Scooters. Made from high quality aluminium, the Envy Scooter 4 Bolt H-Clamp is not only knee-friendly in design, but is also strong enough to satisfy even the most extreme scooter rider. SPECS Envy Scooters designed and manufactured quad clamp Made from high-grade aluminium Lightweight and strong

SPECS Comes with shim to fit oversize and standard scooter bars Works on IHC or HIC compressions 2x 6mm screws

Hailing from Paris with team riders spread all over the world, Ethic have been very progressive in design. Ethic Hand Grips have shock absorbing technology to help cushion your hands, helping you focus on your riding and tricks. They come in many colours. These are a definite addition to any scoot.  Length: 170mm Diameter: 33mm Silicon Bar Ends Weight: 150g

The S1 Lifer Helmet is one of the best fitting and safest helmets for skateboarding, longboarding, BMX and roller derby. This helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a Certified "multi-impact" helmet and up to 5x more protective than the soft foam non-certified helmets. This is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non certified helmet.   Sizing: The S1 Lifer helmet fits 20.5"...

S1 Lifer Helmet Navy Matte The S1 Lifer Helmet is one of the best fitting and safest helmets for skateboarding, longboarding, BMX and roller derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a Certified "multi-impact" helmet and up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non certified...

S1 Mini Lifer Helmet Black Matte The S1 MINI Lifer helmet is a scaled down version of the S1 Lifer helmet. It is a smaller mold with shorter straps. The MINI Lifer helmet is great for little rippers or people with smaller heads. The S1 MINI Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX, Scootering, Roller Skating and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a certified...

S1 Lifer Helmet Bright Green Matte The S1 Lifer Helmet is one of the best fitting and safest helmets for skateboarding, longboarding, BMX and roller derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a Certified "multi-impact" helmet and up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non...

The S1 Lifer Helmet is one of the best fitting and safest helmets for skateboarding, longboarding, BMX and roller derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a Certified "multi-impact" helmet and up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non certified helmet. The S1 Lifer Helmet...

Little skater features. Grown up style. The Lil 8 lets the littlest riders wear the classic Triple 8 style in a new Dual Certified helmet. Perfect for bikers and skaters, it features kid-friendly features like an Adjustable Fit Dial System and pinch-proof buckle protector. So whether they ride a bike, skateboard or scooter, they can rock it like a pro! Ideal for Biking, Skateboarding, Inline Skating/Roller Skating, and Scooters. SPECS: Australian and New Zealand certified Dual Certified: Complies with U.S. CPSC Bike and ASTM Skate safety standards ABS outer shell with EPS liner Complete with our renowned Sweatsaver™ Fit Pads...

The new Fasen 2-Bolt Double Clamp is a more solid design for Fasen, while still keeping the usual stylish feel Fasen is known for. The Fasen 2-Bolt Double Clamp fits both oversize and standard bars thanks to the included shim and will work with IHC, HiC or ICS compression systems. SPECS: Includes shim to fit oversize and standard bars Internal diameter: Oversize (34.9mm) Compatible Compressions: HIC (without shim) IHC, or ICS (with shim) Weight: 91g   Colour: Gold